ubuntu – 配置flannel以在kubernetes中使用非默认接口

有没有办法定义法兰绒应该在哪个界面听？根据 his documentation在/ etc / sysconfig / flanneld中添加FLANNEL_OPTIONS =“ – iface = enp0s8”应该可行,但事实并非如此.

我的主节点配置在xenial(ubuntu 16.04)vagrant中运行：

$sudo kubeadm init --pod-network-cidr 10.244.0.0/16 --apiserver-advertise-address 10.0.0.10 

$kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
clusterrole "flannel" created                                                                    
clusterrolebinding "flannel" created                                                                   
serviceaccount "flannel" created                                                                 
configmap "kube-flannel-cfg" created                                                                                                                                                       
daemonset "kube-flannel-ds" created   


ubuntu@master:~$kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/k8s-manifests/kube-flannel-rbac.yml
clusterrole "flannel" configured                                                          
clusterrolebinding "flannel" configured

主机IP地址：

$ip addr                      
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1     
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00                                    
    inet 127.0.0.1/8 scope host lo            
       valid_lft forever preferred_lft forever                                               
    inet6 ::1/128 scope host                  
       valid_lft forever preferred_lft forever                                               
2: enp0s3: <BROADCAST,MULTICAST,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000                                                                                    
    link/ether 02:63:8e:2c:ef:cd brd ff:ff:ff:ff:ff:ff                                       
    inet 10.0.2.15/24 brd 10.0.2.255 scope global enp0s3                                     
       valid_lft forever preferred_lft forever                                               
    inet6 fe80::63:8eff:fe2c:efcd/64 scope link                                              
       valid_lft forever preferred_lft forever                                               
3: enp0s8: <BROADCAST,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000                                                                                    
    link/ether 08:00:27:fb:ad:bb brd ff:ff:ff:ff:ff:ff                                       
    inet 10.0.0.10/24 brd 10.0.0.255 scope global enp0s8                                     
       valid_lft forever preferred_lft forever                                               
4: docker0: <NO-CARRIER,BROADCAST,UP> mtu 1500 qdisc noqueue state DOWN group default                                                                                            
    link/ether 02:42:da:aa:6e:13 brd ff:ff:ff:ff:ff:ff                                       
    inet 172.17.0.1/16 scope global docker0   
       valid_lft forever preferred_lft forever                                               
5: flannel.1: <BROADCAST,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN group default                                                                                         
    link/ether 5e:07:a1:7f:97:53 brd ff:ff:ff:ff:ff:ff                                       
    inet 10.244.0.0/32 scope global flannel.1 
       valid_lft forever preferred_lft forever                                               
    inet6 fe80::5c07:a1ff:fe7f:9753/64 scope link                                            
       valid_lft forever preferred_lft forever                                               
6: cni0: <NO-CARRIER,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000                                                                                     
    link/ether 0a:58:0a:f4:00:01 brd ff:ff:ff:ff:ff:ff                                       
    inet 10.244.0.1/24 scope global cni0      
       valid_lft forever preferred_lft forever                                               
    inet6 fe80::7037:fcff:fe41:b1fb/64 scope link                                            
       valid_lft forever preferred_lft forever

豆荚名称：

$kubectl get pods --all-namespaces                                                                                                                                         
NAMESPACE     NAME                             READY     STATUS              RESTARTS   AGE  
kube-system   etcd-master                      1/1       Running             0          2m   
kube-system   kube-apiserver-master            1/1       Running             0          2m   
kube-system   kube-controller-manager-master   1/1       Running             0          2m   
kube-system   kube-dns-545bc4bfd4-gjjth        0/3       ContainerCreating   0          3m   
kube-system   kube-flannel-ds-gdz8f            1/1       Running             0          1m   
kube-system   kube-flannel-ds-h4fd2            1/1       Running             0          33s  
kube-system   kube-flannel-ds-rnlsz            1/1       Running             1          33s  
kube-system   kube-proxy-d4wv9                 1/1       Running             0          33s  
kube-system   kube-proxy-fdkqn                 1/1       Running             0          3m   
kube-system   kube-proxy-kj7tn                 1/1       Running             0          33s  
kube-system   kube-scheduler-master            1/1       Running             0          2m

法兰绒原木：

$kubectl logs -n kube-system kube-flannel-ds-gdz8f -c kube-flannel
I1216 12:00:35.817207       1 main.go:474] Determining IP address of default interface
I1216 12:00:35.822082       1 main.go:487] Using interface with name enp0s3 and address 10.0.2.15
I1216 12:00:35.822335       1 main.go:504] Defaulting external address to interface address (10.0.2.15)
I1216 12:00:35.909906       1 kube.go:130] Waiting 10m0s for node controller to sync
I1216 12:00:35.909950       1 kube.go:283] Starting kube subnet manager
I1216 12:00:36.987719       1 kube.go:137] Node controller sync successful
I1216 12:00:37.087300       1 main.go:234] Created subnet manager: Kubernetes Subnet Manager - master
I1216 12:00:37.087433       1 main.go:237] Installing signal handlers
I1216 12:00:37.088836       1 main.go:352] Found network config - Backend type: vxlan
I1216 12:00:37.089018       1 vxlan.go:119] VXLAN config: VNI=1 Port=0 GBP=false DirectRouting=false
I1216 12:00:37.295988       1 main.go:299] Wrote subnet file to /run/flannel/subnet.env
I1216 12:00:37.296025       1 main.go:303] Running backend.
I1216 12:00:37.296048       1 main.go:321] Waiting for all goroutines to exit
I1216 12:00:37.296084       1 vxlan_network.go:56] watching for new subnet leases

如何在kubernetes中配置flannel以在enp0s8而不是enp0s3中进行监听？

Vagrant typically assigns two interfaces to all VMs. The first,for
which all hosts are assigned the IP address 10.0.2.15,is for external
traffic that gets NATed.

This may lead to problems with flannel. By default,flannel selects
the first interface on a host. This leads to all hosts thinking they
have the same public IP address. To prevent this issue,pass the
–iface eth1 flag to flannel so that the second interface is chosen.

所以我在法兰绒的吊舱配置中寻找它.
如果您下载了kube-flannel.yml文件,您应该查看DaemonSet规范,特别是在“kube-flannel”容器中.在那里,你应该添加所需的“–iface = enp0s8”参数(不要忘记“=”).我用过的部分代码.

containers:
  - name: kube-flannel
    image: quay.io/coreos/flannel:v0.10.0-amd64
    command:
    - /opt/bin/flanneld
    args:
    - --ip-masq
    - --kube-subnet-mgr
    - --iface=enp0s8

然后运行kubectl apply -f kube-flannel.yml

希望有所帮助

（编辑：岳阳站长网）

【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容!